Spacer photos in description not necessarily this set.

POLYURETHANE SUSPENSION LIFT SPACERS - EASY AND EFFECTIVE WAY TO LIFT YOU VEHICLE 

Is your Nissan too low, often scraping the front bumper or hitting the underbody? Maybe you just want to install bigger wheels or level the front height with the rear? Or maybe you're heading off-road and need more ground clearance? We have the solution – an easy, quick, and affordable way to raise your vehicle.

THE TECHNICAL CHARACTERISTICS OF LIFT KITS.

These struts and spring spacers are made of high-quality polyurethane.

Polyurethane is the most popular material used in automotive suspension components. This ensures the high quality and durability of the lift kit. The inserts, which provide precise spacer installation onto the strut mounting plate, made from high-quality steel.

What do you get when you purchase the Seksuspension™ vehicle lift kit? :

SET OF SPACERS : Shock absorber and spring spacers. A spacer kit designed for both the front and rear of the vehicle. Usually, two are used for the front, and two or four for the rear (depending on the vehicle’s suspension type).

SET OF METAL MOUNTING COMPONENTS : High-quality steel bolts, zinc-coated. Longer than the original ones. Used for spacer installation. Nuts and, if necessary, washers.

SET OF STRUT EXTENSION BOLTS : Stainless steel shock absorber rod extension bolts. Since the vehicle's ground clearance increases, this bolt is designed to extend the shock absorber’s travel.

LIFT KIT IS COMPATIBLE WITH :

Model / Generation :

Nissan Leaf (First generation) AZEO ZEO 

Years of manfacture :

2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

We also offer more :

Nissan Lift Kits

Nissan Leaf 1 Suspension Leveling Kit :

We offer kits of various heights. Choose a lift kit ranging from 20 to 40 mm. If you need to lift only one end of the car, just choose the height and select the front or rear. All necessary components included in the kit you choose, depending on the height and the side.

How to choose the height correctly :

Although an additional 10 or 20 mm in height may not seem like much, we recommend choosing the height carefully, becouse it often exceeds expectations. Measure the gap between the wheel and the arch, and decide how much you want to lift your Volkswagen.

LIFT KIT INSTALLATION PROCESS:

There are two types of installation:

1. Installation does not require disassembly of the shock absorber.

There’s no need to disassemble the struts – simply disconnect it from the vehicle and insert the spacer in between, using longer bolts. The same applies to the spring : just compress it and install the spacer in the gap. In just an hour or a little more, you can raise your car and give it extra ground clearance.

2. Installation requires partial disassembly of the shock absorber.

This method is slightly more complex, but don’t worry — it only involves a few more bolts.
You’ll need to remove the shock absorber’s mounting plate and install the spacer into it. For this, you will need to compress the spring.

In the end, this is the easiest method.
You won’t need new shock absorbers, springs, or any other suspension components. By using these spacers, you can easily and affordably raise your vehicle while keeping the original suspension.

The typical location of spacers in the chassis / suspension system.